Partlow MRC 7800, Installation, Wiring, Operation Manual

Page: 30 / 57

P
AGE
30
TABLE 4-3 ALARM SET MODE CONFIGURATION PROCEDURE
Press and release the SCROLL key until ASEt is displayed, then press the DOWN key.
Press the SCROLL key to advance the display through the parameters
1 Process Alarm1 PAL1 0 to 9999 units 0.0
2 Process Alarm 2 PAL2 0 to 9999 units 0.0
3 Barometric Pressure bAro 0.0 to 35.9
29.9
(EuPA = 7 only)
TABLE 4-4 DATA LOGGER SETUP MODE CONFIGURATION
Depress the SCROLL key until dLS is displayed. Use the DOWN key to enter the Data logger
setup mode. Depress the SCROLL key to scroll through the parameters and their values.
Use the UP and DOWN keys to adjust the values. After adjusting a parameter, depress the
SCROLL key to proceed to the next parameter. After all selections have been made, depress
the UP key with a parameter code in the display (not a setting) to exit the mode.
1 Day of the week dAy 1 to 7
1
1=Monday through
7=Sunday
2 Time of Day in tod 00.00 to 23.59 00.00
HH.MM format
3 Time to Log Data ttLd 00.01 to 23.59 23.59
4 Date in MM.DD dAtE 1.01 to 12.31 01.01
month and day format
5 Year yEAr 1990 to 2089 1997
Note: Before using the Data Logger Display mode, it is suggested that a CAL8 be
performed to initialize the data table.
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODE SETTINGS SETTING SETTING
DISPLAY AVAILABLE FACTORY YOUR
STEP DESCRIPTION CODE SETTINGS SETTING SETTING