Particle Monitor One, Manual

Page: 44 / 45

Product handling
The Monitor One contains highly sensitive electronic circuitry and is an Electrostatic Sensitive
Device (ESD). Handling an module without proper ESD protection may destroy or damage it
permanently. Proper ESD handling and packaging procedures must be applied throughout the
processing, handling and operation of any application that incorporates the module. ESD
precautions should be implemented on the application board where the B series is mounted.
Failure to observe these precautions can result in severe damage to the module!
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
This device must be treated as Waste Electrical & Electronic Equipment (WEEE) when disposed of.
Any WEEE marked waste products must not be mixed with general household waste, but kept
separate for the treatment, recovery and recycling of the materials used. For proper treatment,
recovery and recycling; please take all WEEE marked waste to your Local Authority Civic waste site,
where it will be accepted free of charge. If all consumers dispose of Waste Electrical & Electronic
Equipment correctly, they will be helping to save valuable resources and preventing any potential
negative effects upon human health and the environment of any hazardous materials that the
waste may contain.
ESD PRECAUTIONS
BATTERY WARNING
DISPOSAL