![background image](http://html1.mh-extra.com/html/parsun/f115-bex-t/f115-bex-t_service-manual_3878953105.webp)
99
Disassembly and inspection of bracket
1.
Remove the left and right absorber covers, and remove the left and right absorbers and
double-hole absorber fixing nuts. Remove the left and right absorbers
2.
Remove the water unit, oil pan and exhaust manifold seat as a whole from the bracket.
3.
Remove the screw of the anode retaining plate and remove the bracket anode.
4.
Remove the elastic retainer ring for shaft and remove the warping pin shaft. Remove the
screw of hydraulic warping positioning shaft and the hydraulic warping positioning shaft,
and remove the hydraulic warping assembly.
5.
Remove the solenoid clamp, the bracket clamping nut and clamping bracket twin-headed
thread assembly. Remove the grounding cable and left and right clamp brackets.
6.
Remove the retainer ring, pull off the fixed block of the shock absorber, pull out the
steering bracket assembly, and remove the inner bushing, upper bushing and O-ring.
7.
Remove the tension spring bracket and swing rod spring. Remove the elastic cylindrical
pin, and remove the swing rod assembly of the support frame and the A and B
assemblies of the support frame.
8.
Remove the warping sensor retaining plate screw and remove the warping sensor
assembly.
9.
Check the rotary bracket and clamp bracket for cracking or damage. Replace it if
necessary.
10.
Check the inner bushing and upper bushing; Replace it if damaged or cracked.
11.
Check the support frame assembly for deformation or damage. Replace it if necessary.
12.
Check the left and right absorber rubber for aging, cracking, or degumming. Replace it if
necessary.
13.
Check whether the anode is seriously corroded. Replace it if necessary.
Disassembly and inspection of water unit
1.
Drain the oil.
2.
Remove the mounting bolts on the water and underwater, and remove the water unit.
3.
Remove the exhaust manifold set and oil pan.
4.
Remove the coarse filter assembly from the exhaust manifold seat, and remove the
double-hole shock absorber, pressure valve assembly and exhaust rubber pipe.
5.
Remove the exhaust partition, oil drain bolt and oil drain rubber sleeve and exhaust
rubber elbow from the oil pan.
6.
Check the water unit housing and oil pan for cracking or damage. Replace it if
necessary.
7.
Check the exhaust manifold for cracking or damage. Replace it if necessary.
Summary of Contents for F115 BEX-T
