Great Pyrenees Installation Instructions
Page 4 of 8
Magnetic Mount Instructions
Step 1.
Select a mounting location. The magnetic mount can be placed on ferromagnetic surfaces, such as iron,
steel, and nickel. The antenna should be as far away as possible (at least 18”) from other roof-mounted
devices such as light bars and other antennas to avoid de-tuning or interference issues.
Step 2.
Place the antenna on the mounting surface. Check that all magnetic feet are touching the surface. Adjust
the height of the magnetic feet by rotating the feet.
Figure 4
Routing the Cables
Step 1.
Route the cables from the antenna to the router, maintaining a minimum bend radius of 0.5”. Avoid sharp
bends and run the cables adjacent to existing wiring.
Step 2.
Waterproof the RF connectors using electrical tape or heat shrink tubing, if required.
