Step 1.
Step 2.
Step 3.
Choose a mounting location. The magnetic mount can be mounted on ferromagnetic metals like iron, steel, nickel etc
but not aluminum, copper etc.
Magnetic Mount Instructions (PTA0329)
Make sure the antenna is mounted at least 18 inches or as far as possible from the other roof mounted items like
antennas, light bars etc. to avoid any de-tuning or interference issues.
Make sure all of the magnets stick firmly to the base. If the surface is a curve adjust the magnets heights using washer.
Step 1.
Step 2.
Route the cable from the antenna to the router by maintaining a minimum bend radius of 0.5in. Avoid sharp bends.
Run the cables adjacent to existing wiring.
Waterproof the RF connectors using electrical tape or a heat shrink tube, if required.
Routing the Cables
