Parrot ANAFI Ai, User Manual

Page: 41 / 91

v.early.1.01 – published on November 2, 2021
41
S
MART
L
I
P
O
B
ATTERY
ANAFI Ai ’s smart LiPo battery is preinstalled on the drone. It can be charged
whether it is installed on ANAFI Ai, or not.
Battery removal
To remove the smart battery from the drone, unfold the arms of ANAFI Ai and
press the push-button located under the battery and disengage it from the drone.
Battery installation
To install the smart battery back on the drone , unfold the arms of ANAFI Ai,
slide the battery firmly into the drone until the you feel and hear the battery clicking
into the body of the drone. Check that the battery is tightly secured into the drone.
You are set!
ANAFI Ai: battery ready for installation
Battery charging
To charge ANAFI Ai ’s smart LiPo battery , use one of the enclosed USB-C to
USB-C cable to plug the battery to its charger, or to:
o
a tabletop or laptop computer’s USB-C port;
o
a power bank’s USB-C port.
Full charging time
depends on temperature. At 20°C, you can expect charging your
battery in 2 hours.