23
Cautions
1. The induction hotplate must be installed by qualified personnel or technicians.
Do not attempt to install it yourself to avoid personal injuries and voiding the
warranty.
2. The hob cannot be installed directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer, as the humidity may damage the hob
electronics.
3. The induction hotplate shall be installed so that better heat radiation can be
achieved to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand
heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat resistant.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply by a qualified
electrician only.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the
rating plate. To connect the hob to the mains power supply, do not use
adapters, reducers, or branching devices, as they can cause overheating and
fire. The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75
˚
C at any point.
Check with an electrician whether the domestic wiring system is suitable.
