19
Pans do not become
hot and appear in
the display.
The induction hob cannot
detect the pan because it is
not suitable for induction
cooking.
The induction hob cannot
detect the pan because it is
too small for the cooking
zone or not properly
centered on it.
Use cookware suitable for
induction cooking. See section
‘Choosing the right cookware’.
Centre the pan and make sure
that its base matches the size of
the cooking zone.
The induction hob
or a cooking zone
has turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed (typically
alternating with one
or two digits in the
cooking timer
display).
Technical fault.
Please note the error code, switch
the power off at the wall, and
contact Parmco or an authorised
technician.
Failure Display and Inspection
If a malfunction comes up, the induction hob will enter in a protective state
automatically and display one of the following error codes:
Problem
Possible causes
What to do
F3-F8
Temperature sensor failure
Please contact Parmco.
F9-FE
Temperature sensor of the IGBT
failure.
Please contact Parmco.
E1/E2
Abnormal voltage supply
Check the power supply.
Turn the unit on after the power
supply is back to normal.
E3/E4
Abnormal temperature
Please check the pot.
E5/E6
Improper heat radiation
Please restart the induction hob
after it cools down.
The above errors are some of the most common failures.
Please do not disassemble the unit by yourself to avoid any danger and damage
to the induction hob, or void the warranty.
