background image

 

7

 

 
 
 

The Tilta units can have the fan speed and lighting preset so that it automatically 
operates when the front cover is extended out. The unit can also be operated 
manually once the front cover is extended out. The Tilta units will not operate when 
closed. 

  
 
 
 

 
 
 
 

A = 

Three speed power switch 

B = 

Power light indicator 

C = 

Lighting switch. 

 

 
The Tilta units can be operated on 3 different speed levels, level I being the lower 
speed and level III being the highest. 
 

Cleaning of the filters regularly will ensure better performance and longer 
appliance life. The lighting switch can be operated without the motor running if 
ambient light is required.  

 

 
 
 
 

 
 

When performing maintenance and cleaning ensure that the unit is turned off 
and the plug disconnected from the socket 
 

Vapours and odours in the cooking air are exhausted through the aluminium 
grease filter then the carbon filter (when fitted). The efficiency of this appliance 
depends on the condition and cleanliness of these filters. 
 
 

Aluminium Grease Filters 

These filters should be washed every 10-15 days depending on the type of 
cooking being undertaken. Cooking styles with high oil content will require more 
frequent cleaning. Filters should be dipped into warm soapy water, soaked for 10 

Operating Instructions

Care and Maintenance

Summary of Contents for TILTA T1-6-2L













Reviews: