Parmco TILTA T1-6-2L Installation And Operating Instructions Manual Download Page 4

 

2

 
 
 
 
 

For best performance and to extend the life of your appliance we recommend that 
you read the instructions in this owners manual thoroughly before using your new 
appliance. It will provide you with all the information you need to ensure its safe 
installation, proper use and maintenance. Retain this owners manual for future 
reference. 
 
To maintain the efficiency  and safety of this appliance we recommend the following: 
 
 

BEFORE USING THIS APPLIANCE 

 
Read the instructions thoroughly 

 

Remove all plastic protective films on the appliance before operating the 
appliance. 

 

The brackets and screws to fix this canopy to the wall are provided and are fixed 
to the inside packaging. Please check that the brackets and screws are not 
discarded with the packaging.  

 

 
 

 
 

 

This appliance is designed for non-commercial, household use only and must not 
be altered in any way. 

 

This appliance can only be used safely when it is correctly connected to an 
efficient earthing system in compliance with  New Zealand  Electrical Standards 
requirements. 

 

Before maintenance or cleaning always ensure that the appliance is disconnected 
from the mains. 

 

Packaging items such as plastic bags, polystyrene, nails etc that this appliance is 
delivered in are potentially dangerous, and therefore appropriate measure must 
be taken to prevent children from coming into contact with them. 

 

This appliance must only be used by adults. Make sure that children do not touch 
the controls or play with the appliance. Young children should be supervised to 
ensure they do not play with the appliance. 

 

This appliance is not intended for use by persons (including children) with 
reduced physical, sensory, or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
the use of this appliance by a person responsible for their safety. 

 

The exposed parts of this appliance may heat up during the cooking process and 
remain  hot  for  some  time  aftewards,  even  after  it  has  been  switched  off.  Keep 
children well away during operation and while the unit is cooling down. 

 

Keep the appliance thoroughly cleaned. Residues may cause fire risks. 

IMPORTANT SAFETY INFORMATION 

Safety Information

Summary of Contents for TILTA T1-6-2L













Reviews: