Warning!
When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle,
is securely retightened so as to stop leaks and young
If you wash rugs, it is compulsory to inspect and clean the filter
.
Cleaning the water inlet filters
Important!
If the appliance doesn't fill, takes a long time to fill with water, the start button blinks yellow or the display (if
available) shows the relevant alarm (see chapter «What to do if...» for more details), check if the water inlet
filters are blocked.
To clean the water inlet filters:
Turn off the water tap.
8QVFUHZWKHKRVHIURPWKHWDS
&OHDQWKHILOWHULQWKHKRVHZLWKDVWLI
f brush.
6FUHZWKHKRVHEDFNRQWRWKHWDS0DNHVXUHWKHFRQ
nection is tight.
8QVFUHZWKHKRVHIURPWKHPDFKLQH.HHSDUDJQHDU
by
because some water may flow.
&OHDQWKHILOWHULQWKHYDOYHZLWKDVWLI
f brush or with the
6FUHZWKHKRVHEDFNWRWKHPDFKLQHDQGPDNHVXUHWKH
Turn on the water tap.
Frost precaution or emergency emptied out
,IWKHPDFKLQHLVH[SRVHGWRWHPSHUDWXUHVEHORZ&
or if the water is not discharged, proceed as follows.
1 Pull out the plug from the power socket.
2 Turn off the water tap.
3
8QVFUHZWKHLQOHWKRVH
4 Place a bowl on the floor and place the end of the inlet and drain hoses into it. The water should drain by
gravity into the bowl.
and is empty. When replacing the cover, ensure it
children being able to remove it.
piece of cloth.
connection is tight.
15