1
2
Screw the inlet water pipe out.
Clean the gauze filter with a small
soft bristle brush.
Cleaning of the inlet water valve
If the inlet water time is found to be too long, please clean the filter net of the inlet valve.
If the machine needs emergency drainage
Rotate the programme selector dial to OFF(stop) position and to close the water tap.
1
If necessary, wait until the water has cooled down.
2
Place a container on the floor, pull out the emergency emptying hose, place it into the
container.Remove its cap and wait until the remaining water naturally flows out.
3
Emergency drainage pipe
Drainage pipe ferrule
If the machine needs emergency drainage, please follow the methods below when the
machine cannot work normally :
Open the filter's door
Turn the emergency
drain hose cap
Pull out the emergency
emptying hose
Remove the cap
.
If the machine doesn’t have Emergency drainage, please follow the methods[1] above .
Cleaning of the filter of the drainage pump
Please clean the drainage pump regularly to prevent the sundries blocking the drainage pipe.
Close the water tap
Empty the water from the pump to a container cautiously .
Install the pump cover
1
4
Screw the pump cover out and clean the filter
5
6
If the washing machine doesn’t function properly or the filter net of the drainage pump cannot be cleaned,
pleasefollow the methods below
2
Disconnect the power plug
If necessary,wait until the water
3
has cooled down
Pump cover
14