9
When installing the goose neck tap on the 90cm model please make sure the tap is orientated as
per below picture with the tap handle facing the front of the unit.
From the top of the laundry station carefully push through one water inlet hose first and then the
other. This will ensure you do not scratch the stainless steel top.
From the underside of the tub place the rubber washer on the threaded securing rod. Then place
the brass securing bracket over the threaded securing rod. Finally screw on the securing nut. Make
sure that the securing nut is tightened fully.
CONNECTING THE SINK INSERT, OVERFLOW AND WASTE
Connect the sink waste insert first.
Grey undersink trap
and rubber flange
Rubber gasket and
securing screw
Stainless steel drainer