Parmco LS-SLIM Installation And Operating Instructions Manual Download Page 4

 

4

IMPORTANT SAFETY INFORMATION 

 
 
For best performance and to extend the life of your laundry tub, we recommend that you read the 
instructions in this owners manual thoroughly before using your new laundry tub. It will provide 
you with all the information you need to ensure its safe installation, proper use and maintanence. 
Retain this owners manual for future reference. 
 
 

BEFORE USING THIS LAUNDRY TUB 
 
Read the instructions thoroughly before installing the laundry tub 
 

 

Remove all plastic protective films on the laundry tub before operating the laundry tub. 

 

This product is not intended for use by young children or infirmed persons without supervison. 

 

Young children must be supervised to ensure that they do not play with this product. 

 

It is very important that the water supply pipes to the laundry tub are thoroughly flushed to 
remove debris prior to the connection of the laundry tub. Debris and other foreign matter 
may damage the ceramic cartridge in the mixer tap and is not covered by warranty. 

 

To prevent damage to the ceramic cartridge, it is recommended that an “inline” filter is fitted 
prior to the the mixer tap. Damage to the cartridge caused by debris/grit is not covered under 
warranty.

 

 

Recommended temperature range for the mixer tap is 5-55°C with a maximum permissible 
temperature of 80°C. 

 

The maximum operating pressure is 1000kPa and the minimum is 35kPa. 

 

 

 
 
 

 

COMPLIANCE 

Please check with your local authority regarding compliance with the current Plumbing and 

Drainage regulations. A registered plumber is required to carry out “sanitary” plumbing. All 

plumbing work must be carried out in accordance with all relevant New Zealand Standards. All 

electrical work must be carried out in accordance with all relevant New Zealand Standards. In 

some cases this product may need to be earthed. 

Summary of Contents for LS-SLIM














Reviews: