7
CONNECTING TO THE WATER SUPPLY
You will notice that the entire pipe assembly is unassembled. For your convenience, the pipe work
has been specifically not assembled to allow you to easily change the pipe assembly to best match
your particular installation situation. The directions below show one example of how to connect
the cold water connection to the tub mixer tap and the washing machine cold water inlet. The hot
water connection for the tub mixer tap is connected directly to the hot water “wingbat”
connection at the wall.
Lay the pipe assembly on the floor and become familiar with the component parts.
IMPORTANT
Every connection must be tightened and each join correctly connected with suitable
washers/plumbers tape/hemp before allowing water through the pipes before allowing water
through the pipes.
IMPORTANT
Every connection must be tightened and each join correctly connected with suitable
washers/plumbers tape/hemp before allowing water through the pipes before allowing water
through the pipes.
Washing machine
cold water inlet
To cold water supply
Mixer tap cold
water inlet
Water supply shut off
Water supply shut off
½ inch brass T
½ - ¾ inch adaptor