background image

 

Important Safety Warnings 

1.

 

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent 

or similarly qualified persons. 

2.

 

This product is intended for indoor use only. 

3.

 

Power line connection: The power cord should be connected in compliance with the 

relevant New Zealand standards. 

4.

 

If the appliance is being connected directly to the mains an Omni-polar circuit-breaker 

must be installed with a minimum opening of 3mm between contacts. 
5.

 

Please use a dedicated power protection switch.   

6.

 

Do not wash the hotplate directly with water as excess water entering the hob is a 

hazard. 
7.

 

Never have the hotplate working without food or liquid within the cooking vessel as this 

will affect its operational performance and may damage the unit. 

8.

 

Do not heat unopened canned goods directly on the induction hob as there is a danger 

of explosion due to heat expansion. 

9.

 

After being used for a long time, the corresponding heating zone of the induction 

hotplate will be hot. Do not touch the induction surface to avoid personal injury. 

10.

 

We suggest that you should periodically check that there are no objects (glass, paper, 

etc) that could obstruct the ventilation inlets under your induction hotplate. 

11.

 

Metallic objects such as knives, forks, spoons and lids should not be placed on the 

hotplate since they will get hot. 

12.

 

If the surface is cracked, switch off the appliance and contact Parmco Appliances. To 

avoid the possibility of electric shock do not continue to use a damaged hob. 

13.

 

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge unless they 
have been given supervision or instruction concerning use of the appliance by a person 
responsible for their safety. 

14.

 

Children should be supervised to ensure that they do not play with the appliance. 

15.

 

WARNING: Accessible parts may become hot during use. Young children should be kept 

away. 

16.

 

This appliance is not intended to be operated by means of an external timer or separate 

remote-control system. 

17.

 

Do not clean this appliance using steam cleaners. 

18.

 

After use switch off the hob element at its control.   

Other Safety Precautions 

Your safety is important to us. Please read this information before using your cooktop. 

 No combustible material or products should be placed on this appliance at any time. 

 In order to avoid a hazard, this appliance must be installed by an authorized electrician 

according to these instructions. 

 This appliance should be connected to a circuit which incorporates an isolating switch 

providing full disconnection from the power supply. 

 Failure to install the appliance correctly could invalidate the warranty or liability claims. 

 
 
 

3

Summary of Contents for HO-4-2NF-INDUCT




























Reviews: