20
9. Installation
9.1 Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be preserved around the
hole.
Be sure the thickness of the work surface is at least 30mmbut not greater than 50mm. Please
select heat-resistant and insulated work surface material (Wood and similar fibrous or hygroscopic
material shall not be used as work surface material unless impregnated) to avoid an electrical
shock and larger deformation caused by the heat radiation from the hotplate. As shown below:
Note: The safety distance between the sides of the hob and the inner surfaces
of
the
worktop should be at least 3mm.
A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
G
268
＋
4
-0
500
＋
4
-0
50min
50 min
50 min
50 min
3mm min
Under any circumstances, make sure the Induction cooker hob is well ventilated and the air inlet
and outlet are not blocked. Ensure the Induction cooker hob is in good work state. As shown below
Note: The safety distance between the hotplate and the cupboard above the hotplate should be at
least 750mm and 650mm to a range hood or canopy.
A(mm)
B(mm)
C(mm)
D
E
760
50min
20min
Air intake
Air exit
1= minimum 760mm to
cabinet
1= minimum 650mm to
canopy or rangehood
1
Summary of Contents for HO-4-2NF-INDUCT
Page 3: ......
