14
For Example:
If cooking time takes 45 minutes and you want it to finish at 14:00:
1.
Press button, set the cooking time to 45 minutes with the
+
and
–
buttons.
2.
Press button, set finish time to 14:00 with + and – buttons.
3.
Set cooking temperature and cooking mode by turning the thermostat knob and mode
selector knob.
After the above setting, the current time is displayed and
“AUTO”
will flash, indicating that the
automatic cooking feature is set. When the clock displays 13:15, the oven will
start cooking automatically. While cooking,
“AUTO”
and
will flash. When the clock displays
14:00, the oven automatically stops cooking. The alarm will ring and
“AUTO” will flash. Press the button and the ringing will stop.
Semi Automatic Setting
1.
Press button, set cooking finish time with + and – buttons. (Up to 23 hours and 59
minutes).
2.
Set cooking temperature and cooking mode by turning the thermostat knob and mode
selector knob.
The oven starts immediately, and
“AUTO”
will flash. At the finish time reached, the oven
automatically stops cooking. The alarm will ring and
“AUTO”
will flash. Press the alarm bell to stop
the ringing.
When the button is pressed during semi-automatic cooking, the set cooking time
is displayed. If the button is pressed and the time set back to 0, the semi-
automatic setting will be cancelled. When the button is pressed again, the oven will revert
back to manual mode.
Timer
The digital timer can be set up to 23 hours and 59 minutes maximum.
To set the timer, press alarm button and then + or – button until the desired time is displayed.
Once the alarm button is released, the current time and alarm symbol will be displayed. When the
alarm button is pressed, the remaining time is displayed. When the set time is reached, the alarm
symbol disappears and the alarm will ring. To stop the alarm, press the alarm button.
NOTE:
After pressing the alarm button, timer settings should be entered within 5 seconds. In case
of power failure, all settings including the time display will be lost. When the power is restored,
three ‘0’ and “
AUTO”
will be displayed.
Summary of Contents for FS 600-CER
Page 10: ...9 Controls ...
