
13
4.
Use 4pcs ST4*30mm screws to fix the blower cavity on the 4 installation holes of the
cupboard.See Pic 3.
5.
Install the V-flap onto the outlet of the blower cavity,please note the pin on the v-flap
should be faced outwards,refer to pic 4,then lay the expansion pipe on the inlet and
outlet,and tie it tight with cable tie,lead the outlet pipe to the outlet hole on the wall
afterwards.See Pic 5.
6.
Put a towel or cloth on the table surface.Place the glass face down on the protected
surface.See Pic 6.
7.
Apply the strip seal to the edge of the bottom of the hob,leaving about 3mm from the
edge of the glass.Apply the seal all around the circumference.Cut any excess and bring the
two ends of the seal together so they match.See Pic 7.
8.
Use 4 pcs ST4*8mm screws to install the four buckles onto the induction hob.See Pic 8
.