background image

 

2. INSTRUCTIONS FOR DISPOSAL  

Our household appliances are packaged using only non-pollutant, environmental-friendly, recyclable 
materials. Please help by disposing of the packaging correctly. Find the correct address of collection, 
recycling and disposal centres from your local organizations. 

Never leave all or part of the packaging lying around. 

Your old appliance also needs to be disposed of correctly. Correct disposal means intelligent recycling of 
valuable materials. 

Before disposing of your appliance, it is important to remove doors and leave shelves in position as for use 
to ensure that children cannot be accidentally trapped inside during play. It is also necessary to cut the 
interconnecting cable to the power supply network, removing it along with the plug. 

DO NOT DISCARD PACKACING IN THE HOME ENVIRONMENT. SEPARATE THE VARIOUS WASTE MATERIALS 
AND TAKE THEM TO THE NEAREST SELECTIVE WASTE COLLECTION CENTRE. 

 

INFORMATION FOR USERS 

Pursuant to Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to the reduction of the use of 
hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse. The 
crossed out bin symbol on the appliance indicates that the product, at the end of its useful life, must be 

collected separately from other refuse. Therefore, the user must consign the product that has reached the 
end of its working life to the appropriate selective collection centres for electrical and electronic refuse. 
Adequate selective collection for the subsequent forwarding of the decommissioned product to recycling, 
treatment and ecologically compatible disposal contributes to avoiding possible negative effects on the 
environment and on health and promotes the recycling of the materials of which the appliance consists. 
The illicit disposal of the product by the user results in the application of administrative sanctions. 

 

 

Summary of Contents for AR 600-GAS






















Reviews: