![background image](http://html1.mh-extra.com/html/parkside/wws-glk9-y02/wws-glk9-y02_operation-and-safety-notes_4178595008.webp)
8
Intended use
This gas soldering iron set is designed for soft soldering electrical wires and circuit boards,
removing or drying paint and forming plastic.
It is also suitable for shrink-fitting and softening and removing adhesives.
The soldering iron set may be used for only in accordance with its intended purpose. Any
other use is forbidden. The manufacturer cannot be held responsible for damage or injury
caused by use the machine for other than its intended purpose.
It may be used only for attachments appropriate for the gas soldering iron set. Non-
observance of the safety, assembly and operating instructions while operating the machine
counts as misuse.
Persons operating the gas soldering iron and undertaking maintenance activities must be
familiar with them and informed of the possible dangers. Any applicable health and safety
regulations must also be followed.
Any other applicable local and national legislation must also be followed. The manufacturer
cannot accept any responsibility for damage or injury caused by modifications to the gas
soldering iron.
The gas soldering iron set has not been designed for professional, trade or industrial use, but
for private users in the hobby and DIY sector.
All other applications are expressly ruled out and are considered as unintended use.
Pack contents
Technical specifications
• Gas soldering iron
• Protective cap
• 4 soldering tips (1x pre-assembled)
• Hot air deflector
• Cleaning sponge
• Solder
• Fuel gas cartridge ROTHENBERGER INDUSTRIAL Rofill Super 100