Parkside PWSA 18 A1, Translation Of The Original Instructions, Page: 23 / 170

23
GB
Troubleshooting
Turn off the appliance and, before doing any servicing, remove the battery.
Problems Possible Cause Error correction
Device doesn‘t start
On/off switch ( 5) may be
defective
Repair by Customer Care
Engine faulty
Grinding tools do
not move although
the engine is run-
ning
Grinding disc nut ( 19) is
loose
Tighten grinding disc nut (
19) (see „Changing the grinding
disc“)
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Remove blockages
Engine is slower
and stops
Device is overloaded through
workpiece
Reduce pressure on grinding tool
Workpiece unsuitable
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Grinding disc nut ( 19 is
loose
Tighten grinding disc nut (
19 (see „Changing the grinding
disc“)
Grinding disc is defective Change grinding disc