PWS 125 F6
■
10
│
GB
│
IE
CAUTION!
►
The grinder continues running after being
turned off. Do not try to brake it by applying
lateral counterpressure.
■
Secure the workpiece.
Use clamps/vices to
hold the workpiece firmly. This is much safer
than simply holding it in your hand.
■
Always switch off the appliance before put-
ting it away and wait for the appliance to
come to a complete standstill.
■
Release the ON/OFF switch immediately in
the event of a power failure or when the plug
is pulled out.
Move it into the OFF position.
This prevents an uncontrolled restart.
■
Use the appliance only for dry cutting or
sanding.
■
The additional handle
6
must be fitted to the
appliance for all work.
■
Materials containing asbestos may not be
processed.
Asbestos is a known carcinogen.
Tip! This symbol indicates
proper behaviour.
DANGER! ALWAYS GUIDE THE
APPLIANCE THROUGH THE WORK-
PIECE IN REVERSE ROTATION.
►
In the opposite direction there is a risk of
a kickback. The appliance can be pushed
out of the cut.
■
Always switch the appliance on before apply-
ing it to the workpiece.
After completing the
task, lift the appliance from the workpiece and
then switch it off.
■
Always hold the appliance firmly with two
hands while working.
Ensure that your stance
is secure and stable.
■
For an optimum grinding effect, move the
appliance evenly at an angle of 15° to 30°
(between grinding disc and workpiece) back-
wards and forwards.
■
When working on angled surfaces, do not
exert too much force on the workpiece.
If the
rotational speed drops significantly, you must
reduce the pressure exerted to allow safe and
effective working. If the appliance suddenly
brakes completely or jams, it must be switched
off immediately.
■
Cutting: Work at a moderate feed rate and
do not tilt the cutting disc.
■
Roughing and cutting discs become very
hot – let them cool down completely before
touching them.
■
Never use the appliance for purposes other
than the ones for which it was designed.
■
Always make sure that the appliance is
turned off before plugging it into the wall
socket.
■
In the event of danger, remove the mains plug
from the socket immediately.
Ensure that the
appliance and the power socket are easily and
quickly accessible in the event of an emergency.
■
Always remove the plug from the power socket
during work breaks, when adjusting the ap-
pliance and when it is no longer in use.
The
appliance must be kept clean, dry and free of
oil and grease at all times.
■
Remain alert at all times! Always pay attention
to what you are doing and act with common
sense.
Do not use the appliance if you are dis-
tracted or feeling unwell.
WARNING!
Always wear safety goggles.
WARNING!
Always wear a dust mask!
Summary of Contents for PWS 125 F6
Page 3: ...A B 6a...
Page 4: ...C D I 0 E F...