Parkside PWS 125 F6, Instructions Manual

Page: 13 / 151

PWS 125 F6
GB
│
IE
│ 9 ■
Permissible accessories
Max. diameter Ø (mm)
Max. thickness (mm)
Thr
ead siz
e (mm)
Speed (rpm)
Cir
cumfer
ential speed
(m/s)
Tool
Pr
otectiv
e co
ve
r
Cutting disc 125 3 M14 12200 80
Two-hole assembly
spanner
Yes
Roughing disc 125 6 M14 12200 80
Two-hole assembly
spanner
No
Storage and handling of the
recommended accessory tools
■ Grinding tools must be treated with care and
transported carefully.
■ Grinding tools should be stored in such a way
that they are not exposed to mechanical dam-
age or environmental influences (e.g. damp).
Working procedures
NOTE
► Grinding tools should only be used for the
recommended applications. Otherwise, they
can break, be damaged or cause injuries.
Rough grinding
Never use cutting discs
for rough grinding!
■ Move the angle grinder with moderate
pressure back and forth over the workpiece.
■ For soft material, move the roughing disc
at a flat angle over the workpiece; for hard
material at a slightly steeper angle.
Abrasive cutting
Never use roughing discs
for cutting!
■ Use only tested fibre-reinforced cutting
or grinding discs
that are approved for a
peripheral speed of not less than 80 m/s.