11
GB/IE/NI
3)
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool.
Carrying
power tools with your finger on the switch or
energising power tools that have the switch
on invites accidents .
4)
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left attached to
a rotating part of the power tool may result
in personal injury .
5)
Do not overreach. Keep proper
footing and balance at all times.
This
enables better control of the power tool in
unexpected situations .
6)
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts .
7)
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
The
use of dust collection can reduce dust-related
hazards .
Power tool use and care
1)
Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool will
do the job better and safer at the rate for
which it was designed .
2)
Do not use the power tool if the
switch does not turn it on and
off.
Any power tool that cannot be
controlled with the switch is dangerous and
must be repaired .
3)
Disconnect the plug from the
power source and / or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools.
Such preventive safety measures
reduce the risk of starting the power tool
accidentally .
4)
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool.
Power tools are
dangerous in the hands of untrained users .
5)
Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
the power tool’s operation. If
damaged, have the power tool
repaired before use.
Many accidents
are caused by poorly maintained power
tools .
Summary of Contents for PWDS 920 B2
