GB
IE
22
Suctioning using the textile filter
bag
1. Pull the textile filter bag (16) over the
filter basket (21).
NOTE! We recommend also using the pa
-
per filter bag to ensure the textile filter bag
does not become clogged too quickly.
Suctioning using the paper filter
bag
1. Ensure that the textile filter bag is in
-
serted.
2. Pull the paper filter bag (17) upwards
and over the internal suction fitting (22)
inside the direct container (
6). The
sealing ring (23) on the filter bag open
-
ing must fully surround the connector
(24) on the suction fitting.
Vacuuming fine dust
Certain suction processes (e.g. sanding
paints and varnishes, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk due to hazardous dust.
We recommend using the following option-
al filter combination for fine dust. For filters
not included in delivery, see “Spare parts/
Accessories”:
• Folded filter instead of the textile filter
bag (
16) included in the scope of
delivery.
• Fine dust filter bag made of fleece
instead of the paper filter bag (
17)
included in the scope of delivery.
Blowing function
Preparing the blowing function
1. Remove all filters.
2. Push the suction hose (13) into the
blower connection (11) until it locks in
place.
Restoring the suction function
1. Press the catch (13a) and pull the suc-
tion hose (13) out.
2. Push the suction hose (13) into the suc-
tion connection (
5) until it locks in
place.
3. Insert a filter.
Cleaning and Servicing
WARNING!
Electric shock! Protect
yourself when performing maintenance or
cleaning work. Turn off the appliance. Pull
out the mains plug.
You should have any repair and mainte-
nance work that is not described in these
instructions carried out by our Service Cen
-
tre. Only use original replacement parts.
Cleaning
NOTE! Risk of damage! Improper cleaning
can damage the appliance. Never spray
down the appliance with water. Do not use
any abrasive cleaning agents or solvents.
1. Empty the dirt container (
6) after
every use. To fully empty the dirt con-
tainer, open the fastening clips (8) and
pour the residual liquid out.
2. Clean the dirt container (
6) with a
damp cloth.
Summary of Contents for PWD 20 A1
