Parkside PUV 2000 C2, Translation Of The Original Instructions

Page: 23 / 156

23
GB MT
Grill lighter nozzle
Place the grill lighter nozzle (14) on the
blow-off pipe (
17).
Turn the device on using the on/off switch
(
9).
Place the grill lighter nozzle (14) below the
charcoal. Make sure that the openings of
the grill lighter nozzle (14) are not covered
by charcoal as this creates heat accumula-
tion in the unit, which is a potential fire
hazard In just a few minutes the charcoal
is ignited.
Never use other methods for ignit-
ing charcoal at the same time while
using the grill lighter nozzle (14).
Use the grill lighter nozzle (14) only
for the few minutes necessary to
ignite the charcoal.
Never use the grill lighter nozzle
(14) for any other application.
Conical nozzle
Place the conical nozzle (7) on the
blow-off pipe (
17).
Use the conical nozzle (7) to remove
weeds.
To eliminate weeds, use the conical
nozzle on the plant to be removed
for approx. 5-10 seconds.
For higher plants, you can shrink
them by briefly heating the upper
part of the plant. Then, use the coni-
cal nozzle on the shrunken plant for
5-10 seconds. The ideal spacing is
3 cm (see illustration ).
Cleaning/maintenance/
storage
Ask our service centre to carry out
any work that is not described in
these instructions. Do not try to re-
pair the device by yourself, unless
you have professional training. Use
only original parts.
• Store the device in a dry place and out
of reach of children.
General cleaning and
maintenance work
• Always keep the device clean. Use a
brush or cloth for cleaning, but do not
use any cleaning agents or solvents.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Give the device time to cool down
before you store the device in an en-
closed space.
We are not liable for damages caused by
our equipment. Insofar as these are caused
by improper repair or the use of non-origi-
nal parts or use contrary to instructions.
Waste disposal and en-
vironmental protection
The device, accessories and packaging
should be properly recycled.
Electrical machines do not belong
with domestic waste.