Parkside PTS 500 A1, Instructions Manual

Page: 21 / 50

PTS 500 B2 ■ 18 │
GB
│
MT
PLUNGE SAW PTS 500 B2
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety,
usage and disposal. Before using the product,
familiarise yourself with all handling and safety
guidelines. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is primarily designed for sawing
longitudinal and cross cuts in a plunge saw cut into
firmly supported solid wood, chip board, plywood,
aluminium, tiles, stone, plastics, and lightweight
construction materials. Please note that the pre-as-
sembled saw blade is only suitable for use with
wood. Any other usage of or modification to the
appliance is considered improper and carries the
risk of serious personal injury. Not for commercial
use.
Features
Mechanical plunge lock
Power On / control lamp
Power cord
Ventilation slits
ON / OFF switch
Dial for cutting depth
Cutting depth setting
Markings for cut length
Base plate
Rip fence slot
Rip fence
11a
Screw for rip fence
Viewing window for cutting line
Connection to dust extraction
Spindle lock
Hex key
Saw blade
Clamping flange
Clamping screw and washer
Suction hose
HW circular saw blade Z85 / 30
Diamond-coated cutting saw blade Z85VR
HS circular saw blade Z85 / 36
Laser discharge opening
ON/OFF switch laser
Battery compartment cover
Package contents
1 plunge saw PTS 500 B2
1 HW circular saw blade Z85 / 30
1 diamond-coated cutting saw blade Z85VR
1 HS circular saw blade Z85 / 36
1 rip fence
1 suction hose
1 Hex key
1 carrying case
2 batteries
1 set of operating instructions
Technical data
Nominal power: 500 W
Rated voltage: 230 V ~, 50 Hz (AC)
Idle speed: n
0
4500 min -1
Max. cutting depth: 25 mm
Protection class: II / (double insulation)
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the power
tool is typically as follows:
Sound pressure level: L
PA
= 90,07 dB (A)
Uncertainty: K
PA
= 3 dB
Sound power level: L
WA
= 101,07 dB (A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
= 3.282 m/s 2
Uncertainty K = 1.5 m/s 2