Parkside PTPS 1100 B2, Translation Of The Original Instructions

Page: 25 / 122

25
GB
• In case of stationary installation, the
function of the float switch (
6) is
to be checked regularly (at the latest
every three months).
• With a water jet, remove fluff and
fibrous particles which are possibly pre
-
sent in the pump casing.
• Regularly remove sludge from the pit
base and also clean the shaft walls.
• Clean precipitation from the float
switch with clear water.
• In the case of a long period of non-use,
the pump must be thoroughly cleaned
after the last use and before the new
use, since difficulties in start-up can
arise due to precipitation and residues.
Clean foot part
Always remove the mains plug be-
fore working on the device.
Moving parts create the risk of elec-
trocution or injury.
Dirt on the bottom of the pump can be
washed down with clear water.
Any measures above and beyond these, par-
ticularly opening the equipment, are to be
carried out by an electrician. In the case of
repairs, always contact our service centre.
Storage
• Keep the equipment clean, dry and out
of the reach of children.
• For storage, unscrew the reducer piece
(A 12), the angle adapter with quick-
connect connection (A 11) and the
quick-connect adapter (A 10).
• Coil up the power cord (2) and hang it
over the handle (1). See illustration .
Waste Disposal/Envi-
ronmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Do not dispose of electrical appli-
ances as unsorted municipal waste,
use separate collection facilities.
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmen-
tally sound manner.
Depending on implementation in national
law, you may have the following options:
• Return to a shop,
• Hand over to an official collection
point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.