PSBM 1100 A1
GB
│
IE
│
NI
│
5
■
d)
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are
dangerous in the hands of untrained users .
e)
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage of
parts and any other condition that may affect
the power tool’s operation. If damaged, have
the power tool repaired before use.
Many
accidents are caused by poorly maintained
power tools .
f)
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control .
g)
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation .
5 . Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained .
In accordance with DIN EN 60745-2-1
Safety instructions for drills
■
Wear hearing protection . Exposure to
loud noise can lead to hearing loss .
■
Use the additional handle supplied with the
appliance . Loss of control can lead to injuries .
■
Hold the appliance by the insulated handles
when you are carrying out work during which
the deployed tool may come into contact with
concealed power cables or its own power ca-
ble . Contact with a live wire may electrify ex-
posed metal parts of the power tool and could
give the operator an electric shock .
■
Wear a dust mask .
Appliance-specific safety instructions
WARNING! TOXIC DUST!
►
Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity .
■
CAUTION: SUPPLY LINES! DANGER!
Ensure that you are not likely to hit power, gas
or water supply lines when you are working
with the power tool . If necessary, check with a
service line detector before you start to cut or
drill into a surface .
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks . The following risks can
occur in relation to the power tool’s design and
structure:
1 . Lung damage, if no suitable dust protection
mask is worn .
2 . Hearing damage, if no suitable hearing protec-
tion is worn .
3 . Damage to health caused by hand-arm vibra-
tions if the appliance is used for extended periods
or is not properly used and maintained .
Summary of Contents for PSBM 1100 A1
Page 3: ...A...
