Parkside PSBM 1100 A1 Translation Of The Original Instructions Download Page 11

PSBM 1100 A1

■ 

8 

GB

IE

NI

 

Never permit liquids to penetrate inside the 
appliance .

 

Use a soft, dry cloth to clean the housing . Never 
use petrol, solvents or cleansers which can 
damage plastic .

 

Always clean the appliance after completion 
of work .

 

To clean the dust extractor  , detach it (as 
described above) and shake it out . 

 

Store the appliance in a dry place .

 WARNING!

 

If the mains cable needs to be replaced, this 
must be carried out by the manufacturer or 
an authorised representative in order to avoid 
safety hazards .

 NOTE

 

Replacement parts not listed (such as carbon 
brushes, switches) can be ordered via our 
service hotline .

Disposal

 

The packaging is made from environmen-

tally friendly material and can be disposed 
of at your local recycling plant .

 

Do not dispose of power tools in 

your normal domestic waste!

European Directive 2012/19/EU requires that 
worn-out power tools be collected separately and 
recycled in an environmentally compatible manner .
Your local community or municipal authorities can 
provide information on how to dispose of the  
appliance .

Kompernass Handels GmbH 

warranty

Dear Customer,
This appliance has a 3-year warranty valid from 
the date of purchase . If this product has any faults, 
you, the buyer, have certain statutory rights . Your 
statutory rights are not restricted in any way by the 
warranty described below .

Warranty conditions

The validity period of the warranty starts from the 
date of purchase . Please keep your original receipt 
in a safe place . This document will be required as 
proof of purchase .
If any material or production fault occurs within 
three years of the date of purchase of the product, 
we will either repair or replace the product for you 
at our discretion . This warranty service is dependent 
on you presenting the defective appliance and 
the proof of purchase (receipt) and a short written 
description of the fault and its time of occurrence .
If the defect is covered by the warranty, your product 
will either be repaired or replaced by us . The repair 
or replacement of a product does not signify the 
beginning of a new warranty period .

Warranty period and statutory claims for 

defects

The warranty period is not prolonged by repairs 
effected under the warranty . This also applies to 
replaced and repaired components . Any damage 
and defects present at the time of purchase must 
be reported immediately after unpacking . Repairs 
carried out after expiry of the warranty period shall 
be subject to a fee .

Scope of the warranty

This appliance has been manufactured in accordance 
with strict quality guidelines and inspected meticu-
lously prior to delivery .
The warranty covers material faults or production 
faults . The warranty does not extend to product parts 
subject to normal wear and tear or fragile parts such 
as switches, batteries, baking moulds or parts made 
of glass .

Summary of Contents for PSBM 1100 A1

























Reviews: