9
GB
IE
NI
•
Do not force the tool.
It will do
the job better and safer at the rate for
which it was intended.
•
Use the right tool.
- Do not force small tools to do the job
of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use cir-
cular saws to cut tree limbs or logs.
Use of the power tool for operations dif-
ferent from those intended could result
in a hazardous situation.
•
Dress properly.
- Do not wear loose clothing or jewel-
lery, they can be caught in moving
parts.
- Anti-slip footwear is recommended
when working outdoors.
- Wear protective hair covering to con-
tain long hair.
•
Use protective equipment.
- Use safety glasses.
- Use face or dust mask if working op-
erations create dust.
•
Connect dust extraction equip-
ment.
If the tool is provided for the
connection of dust extraction and col-
lecting equipment, ensure these are
connected and properly used.
•
Do not abuse the cord.
Never
yank the cord do disconnect it from the
socket. Keep the cord away from heat,
oil and sham edges.
•
Secure work.
Where possible use
clamps or a vice to hold the work. It is
safer than using your hand.
•
Do not overreach.
Keep proper foot-
ing and balance at all times.
This enables better control of the power
tool in unexpected situations.
•
Maintain tools with care.
Many accidents are caused by poorly
maintained power tools.
- Keep cutting tools sharp and clean
for better and safer performance.
- Follow instruction for lubricating and
changing accessories.
- Inspect tool cords periodically and if
damaged have them repaired by an
authorized service facility.
- Inspect extension cords periodically
and replace if damaged.
- Keep handles dry, clean and free
from oil and grease.
•
Disconnect tools.
When not in use,
before servicing and when changing
accessories disconnect tools from the
power supply.
Such preventive safety measures reduce
the risk of starting the power tool acci-
dentaIly.
•
Remove adjusting keys and
wrenches.
Form the habit of checking
to see that keys and adjusting wrenches
are removed from the tool before turn-
ing it on. A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
•
Avoid unintentional starting.
Ensure switch is in “off” position when
plugging in.
•
Use outdoor extension leads.
When the tool is used outdoors, use
only extension cords intended for out-
door use and so marked.
•
Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention white operating power tools
may result in serious personal injury.
•
Check damaged parts.
This will ensure that the safety of the
power tool is maintained.
