Parkside PNTS 250 A1, Original Instructions Manual

Page: 6 / 44

6
GB IE
General description
The illustrations can be found
on the front and rear fold-out
pages.
Scope of delivery
Unpack the equipment and check that it is
complete. Dispose of the packaging mate-
rial correctly.
• Appliance
• Pre-assembled spark protection
• Assembly material for mounting the
spark protection on the machine
Adjusting screw incl. washer and snap
ring, nut
• Workpiece support
• Assembly material for mounting the
workpiece support on the machine
- star grip nut, washer, lock washer
and screw
• Instruction Manual
Function description
The wet/dry grinder is a combination ma -
chine, equipped with two grinding discs
with different grain sizes for rough grind-
ing and finishing. One dry grinding disc
and one wet grinding disc.
The device is provided with a spark protec -
tion and protective hoods for the protection
of the user.
For the function of the operating parts,
please refer to the descriptions below.
Summary
1 Wet grinding disc
2 Spark protection
3 Adjusting screw nut for spark
protection
4 Grinding disc cover
5 Dry grinding disc
6 Workpiece support
7 Star grip nut to mount/adjust the
workpiece support
8 On/off switch
9 Rubber foot
10 Drillholes for table mounting
11 Rubber cap (not visible)
12 Power cable
13 Water tank
14 Lock washer
15 Washer
16 Mounting screw for workpiece
support
11 Rubber cap
17 Nut
18 Spark protection holder
19 Washer
20 Spring ring
21 Adjusting screw for spark protec-
tion fastener
22 Grinding disc nut
23 Clamping flange
24 Intermediate layers made of
cardboard
25 Grinding disc cover
26 Washer
27 Clamping flange made of plastic
28 Clamping flange made of plastic