![background image](http://html2.mh-extra.com/html/parkside/pmfw-310-b1/pmfw-310-b1_operation-and-safety-notes_3841364039.webp)
39
GB/MT
General power tool safety warnings
General power tool safety warnings
you are using the device.
Pull the plug
out of the mains socket immediately and have
the device repaired by a suitably qualified per-
son or at your service centre. Damaged mains
leads increase the risk of electric shock.
Wear protective gloves when replacing
a tool in the device.
Tools heat up with
prolonged use.
Use the electrical power tool only for
dry abrading / sawing / cutting.
Do not operate the device if it is damp
and do not use it in a damp environ
ment.
Water entering an electrical device in-
creases the risk of electric shock.
Keep your hands away from the area
of the saw blade.
Do not grip the underside
of the workpiece. Contact with the saw blade
may result in injury.
Use a suitable detector to locate con
cealed services supply cables / pipes
or approach your local public utilities
services providers.
Contact with electricity
cables can lead to fire or electric shock.
Damaging a gas pipe can lead to an explo-
sion. Penetration of a water pipe can lead to
property damage or to electric shock.
If you use the device outdoors, always
connect it through a residual current
device (RCD) with a maximum trip cur
rent of 30 mA.
If using an extension lead, al-
ways use one that is approved for outdoor use.
Any harmful / noxious dusts
generated from sanding represent a risk to the
health of the person operating the device and
to anyone near the work area.
Wear safety glasses and a dust pro
tection mask!
Ensure that there is adequate ventila
tion when working on plastic, paint,
varnish etc.
Do not soak the materials or the sur
face you are about to work on with
liquids containing solvents.
Remaining risks
Even with proper use of this power tool there are
always residual risks. The following hazards may
arise in connection with the construction and design
of this power tool:
a) Lung damage when appropriate breathing
protection is not worn.
b) Hearing damage when suitable hearing protec-
tion is not used.
c) Damage to health arising from vibration when
using the power tool for extended periods or
when used and maintained improperly.
This power tool generates an
electromagnetic field during use. This field could
possibly actively or passively impact medical implants.
To reduce the risk of serious or fatal injuries we rec-
ommend persons with medical implants consult their
physicians and the manufacturer of the medical im-
plant before using this machine.
Advice on use
Principle of operation:
The oscillating drive causes the attached tool to vi-
brate backwards and forwards up to 21000 times
per minute. This means the tool can produce precise
work in the tightest of spaces.
Sawing / cutting:
Use only undamaged, defect-free saw blades.
Distorted, blunt or otherwise damaged saw
blades could break.
When sawing lightweight building materials,
observe the statutory requirements and the
manufacturer’s recommendations.
Use the device in plunge sawing mode on soft
materials such as wood, gypsum plaster board
etc. only!
Sanding:
Ensure that you use even contact pressure. This
will increase sanding sheet life.
Summary of Contents for pmfw 310 b1
Page 3: ...13 13b 13a 13c 1 8 2 3 4 14 7 9 10 11 6 5 12 8...
Page 4: ...C D E F G H B A I J 13 13c 13b 13a 14...
Page 44: ...44...