background image

5

PMFS 200 A1

GB

IE

CY

5.  Service

a)  

Have your power tool serviced by a qualified 
repair person using only identical replace-
ment parts.

 This will ensure that the safety of 

the power tool is maintained.

b)  

Always arrange for the plug or the power 
cord to be replaced by the manufacturer of 
the appliance or by its  approved customer 
services.

 This will ensure that the safety of the 

power tool is maintained.

Appliance-specific safety instructions

 

Secure the workpiece. A workpiece securely 
held by a clamping device or vice is much safer 
than one held in your hand.

 

Do not rest your hands next to or in front of the 
appliance and the area being worked as there 
is a risk of injury if you slip.

 

In case of danger, remove the plug from the 
socket immediately.

 

Always route the power cord towards the rear, 
away from the appliance.

 

RISK OF FIRE DUE TO FLYING SPARKS!

 

If you sand metal, sparks will be produced. 
Ensure that nobody can be put at risk and that 
no combustible materials are located in the im-
mediate vicinity of where you are working.

 WARNING! TOXIC VAPOURS!

 

Working with the tool can produce harmful/
toxic dusts that represent a health hazard for 
the person operating the appliance and for 
any other people in the area.

  

WARNING! DANGER FROM DUST!

 

When working for extended periods of time 
on wood and, in particular, materials that 
produce dust that is hazardous to health, con-
nect the appliance to an appropriate  external 
dust extraction appliance. 

Wear safety gog-

gles and a protective dust mask!

 

Provide sufficient ventilation when working on 
plastics, paints, lacquers, etc.

 

Do not soak the materials or the area to be 
processed with liquids containing solvents.

 

Never work on moistened materials or damp 
surfaces.

 

Avoid sanding lead paint or other harmful 
materials.

 

Materials containing asbestos may NOT be 
processed. Asbestos is a known carcinogen.

 

Avoid contact with the sanding sheet while the 
appliance is running!

 

Do not use the appliance without a sanding 
sheet fitted.

 

Never use the appliance for other purposes 
and only original parts/accessories. Using 
attachments or accessory tools other than those 
recommended in the operating instructions can 
lead to a risk of injury.

 

Always allow the appliance to come to a 
 complete standstill before putting it down.

 

The appliance must always be kept clean, dry 
and free from oil or grease.

Summary of Contents for PMFS 200 A1

























Reviews: