Parkside PLV 1500 C2, Translation Of The Original Instructions

Page: 40 / 160

40
GB
Trouble shooting
Problem Possible cause Remedy
Abnormal noises,
clatter or
vibrations
Foreign body on cylinder
(
16/17)
Remove foreign body
Damaged sprung tines
(
16) or cylinder knives
(
17)
Exchange cylinder
Cylinder (
16/17)
incorrectly mounted
Install cylinder correctly (see
“Exchanging the cylinder”)
Toothed-belt slip
Switch device off and pull power
plug. Remove the soil and grass
residues available.
Implement does
not start
No power
Check power socket, cable, line;
repair only by qualifi ed electrician
Starting lever (
2)
defective
Repair by After-Sales Service
Carbon brushes worn out
Motor defective
Motor fails
Blocked by foreign body Remove foreign body
Grass is too long
Mow beforehand; see chapter
“Operation”
Clogged discharge Clean discharge
Overload protection tripped
Allow implement to cool down for
about 1 minute
Work result not
satisfactory
Sprung tines of aerator
cylinder (
16) worn out
Exchange cylinder (16/17)
Knives of verticutor cylinder
(
17) blunt or damaged
Toothed belt defective Repair by After-Sales Service
Transport Position or
incorrect Working Position
selected
see chapter “Setting the Working
Positions”
Grass is too long
Mow beforehand; see chapter
“Operation”