Parkside PLV 1500 C2, Translation Of The Original Instructions

Page: 32 / 160

32
GB
DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN
DISCONNECTED FROM THE
MAINS! Risk of electric shock.
Do not use the machine, if the
cable is damaged or worn.
• If the machine’s mains power
cord is damaged, it must be
replaced with a specifi c power
cord, which may be obtained
from the manufacturer or their
customer service representative.
• If the connecting cable is dam-
aged, fi rst disconnect the exten-
sion cable from the socket. You
can then disconnect the con-
necting cable of the equipment.
• Keep the extension cables away
from the sprung tines. The tines
may damage the cables and re-
sult in contact with live parts.
• Check that the mains voltage
is the same as indicated on the
rating plate.
• Avoid body contact with
earthed parts (e.g. metal
fences, metal posts). There is an
increased risk of electric shock
if your body is earthed.
• Only use approved extension
cables of the type H05VV-F, with
a maximum length of 75 m and
which have been approved for
open-air use. The stranded cord
diameter of the extension cable
must be at least 1.0 mm 2 . Al-
ways unreel a cable drum to its
full length so that the entire ca-
ble can be checked for damage.
• Use the envisaged cable sus-
pension when attaching an ex-
tension cable.
• Never pull the cable to discon-
nect the plug from the socket.
Protect the cable from heat, oil
and sharp edges.
• Keep the extension cable away
from dangerous moving parts to
prevent damage to cables that
can lead to contact with live
parts.
Residual Risks
There will always be residual risks
even if you operate this electrical
tool according to the instructions.
The following hazards may occur
in connection with the type and de-
sign of this electric tool:
a) a) Cutting injuries
b) Hearing damage if suitable ear
protection is not worn.
c) Health injuries resulting from the
effect of vibration on the hands
and arms in the event that the
device is used over a longer pe-
riod of time or is not used and
maintained properly.
Warning! During operation,
this power tool produces an
electromagnetic fi eld. Under
certain circumstances, this
fi eld may negatively affect
active or passive medical
implants. In order to reduce
the danger of serious or fatal
injuries, we recommend that
individuals who wear medi-
cal implants should consult
their doctor and the manu-
facturer of the implant before
operating the machine.