![background image](http://html1.mh-extra.com/html/parkside/plhlg-2000-c2/plhlg-2000-c2_translation-of-the-original-instructions_4143607021.webp)
21
GB
MT
Switching the device on:
1. Insert the mains plug into a wall socket.
2. Switch the on/off switch (5) to the de-
sired level 1, 2 or 3.
After approximately 1 minute, the
device will reach the full operating tem-
perature.
Switching the device off:
1. To switch the device off, set the on/off
switch (5) to level "0".
2. After using the device, always place
it on its base (
20) on an even,
fireproof surface until the device has
cooled down.
3. Remove the mains plug from the socket
Use as a floor-mounted
appliance
You can use the device as a floor-mounted
appliance. For this purpose, place the devi-
ce on the two bases (9).
Ensure stability and safety and a heat-re-
sistant surface.
The position as a floor-mounted appli
-
ance is also ideally suited to allowing
the device to cool down after use.
Use of adapter nozzles
Before exchanging adapter
nozzles, the adapter nozzle
(15/16/17/18/19) and blow-off
pipe (
1) must be sufficiently
cooled down to avoid burns.
Various uses are possible. Always
comply with the safety instructions
and always handle the device with
care and caution.
Operation
Turning the handle
The device has two handle positions.
Position
1
:
Suitable for eliminating weeds and
lighting charcoal.
After using the device, always place
it in position
1
with its base (20)
and stand bracket (21) on an even,
fireproof surface until the device
has cooled down.
Fold out the stand bracket (21) for
use, and fold it back in after use.
Position
2
:
Suitable for use as a heat gun.
1. To turn the handle (6), move the
lock switch (3) forward towards
the blow-off pipe (1). The " "
icon appears.
2. Keep the lock switch (
3) in
this position and turn the handle
(6) to the desired position.
3. Release the lock switch (
3).
The icon appears. Check
whether the handle (6) has
clicked into the desired position
and can no longer be turned.
Switching on and off
Depending on the application, the device
can be set to three temperature levels
using the on/off switch (5).
Level 1 = 100°C
Level 2 = 350°C
Level 3 = 650°C
Summary of Contents for PLHLG 2000 C2
