Parkside PLGS 2012 A1, Original Instructions Manual, Page: 35 / 330

35
GB MT
overtemperature limit. To do
this, select the “ Overheated ”
field.
- when the battery is fully char-
ged. To do this, select the
“ 100% charged ” field.
- 10 minutes before charging is
completed. To do this, select
the “ 10 min. until fully char-
ged ” field.
• °F/°C switch
Here you can select between the
temperature display in degrees
Celsius and degrees Fahrenheit
• Device information
Here you will find the name of
the charger.
• - Settings
You will find the at the top
right after you have selected the
charger.
- Press the icon again and
you can assign a new image
to the charger under “ Symbol ”,
you can rename the charger
under “ Name ” or assign a
“ Location ” to the charger.
- „ Device info “ lets you view
the virtual ID, among other
options.
- With “ Tap to run and auto-
mate ” you can select and
deselect smart scenarios and
automations. These have to
have been created first. See
the section “ Creating a scena-
rio ”.
- If you go to “ Offline notificati -
on ” you can be choose to be
notified when a device is off-
line for more than 30 minutes.
- Under “ Enable device ”, you
can authorize another user
from the same household to
control the charger using the
Lidl Home app.
- You can find the frequently
asked questions under “ FAQ ”.
- Under “ Check for firmware
upgrade ” you can check
whether the firmware needs to
be upgraded and also per-
form the upgrade.
- The charger can be removed
from the app under “ Remove
device ”. See also chapter
“Disconnecting the device and
deleting data from the app”.