Parkside PLGS 2012 A1, Original Instructions Manual, Page: 32 / 330

32
GB MT
Red + yellow LEDs flash:
Overheated
Red LED illuminated:
Battery defective
Connect the charger
to the Lidl Home app
Only Smart Performance
chargers can be connected
to the Lidl Home app.
Connecting the device
with the Lidl Home App
for the first time requires a 2.4
GHz WLAN connection.
1. Connect the charger to the
mains supply.
The WLAN indicator (9) flas-
hes blue when the charger
is ready to be connected to
the app.
2. Enable Bluetooth® and
WLAN on your smartphone.
3. Enable Bluetooth® on the
device by pressing and hol-
ding the ECO button (8) and
60% button (7) at the same
time for 5 seconds.
An access point is
opened that remains
active for a maximum of 3
minutes.
4. Open the Lidl Home App.
From here there are options

,

and

to connect
the charger.

If the charger is the first device
you want to connect to the app:
5. On the tab, select the
option “ Add device ”.
The app scans the area for
available devices and indi-
cates if available devices
have been found.
If this is not the case,
read on if possible

.
6. If you select “ Go to add ”,
the available devices are
displayed in a list.
7. Select the charger by setting
the check mark . Select only
one device at a time. If there
are other check marks for
other devices, clear the check