Parkside PLG 20 A4, Operating Instructions Manual

Page: 13 / 136

PLG 20 A4
■ 8 │
GB
│
IE
ATTENTION!
♦ If the red control LED flashes, this means that the battery
pack has overheated and cannot be charged .
♦ If the red and green control LEDs both flash, this means
that the battery pack is defective .
♦ Push the battery pack into the appliance .
♦ Switch off the charger for at least 15 minutes between successive
charging sessions . Also disconnect the power plug from the mains
power socket .
Checking the battery charge level
♦ Press the battery charge level button to check the status of the
battery (see also main diagram) .
The status/remaining charge will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Cleaning
■ Clean the appliance with a dry cloth or brush . Do not use water
or metallic objects .
Maintenance and storage
■ If you do not intend to use the appliance for an extended period,
remove the batteries and store it in a clean, dry place away from
direct sunlight .