Parkside PHS 9500 A1, Operating And Safety Instructions Manual

Page: 17 / 40

13 GB/IE/NI
13. Storage
Store unused devices with attached protective cover in a dry,
locked place out of the reach of children.
To extend the service life of the hedge trimmer and guarantee
smooth operation, before storing for a longer period.
Thoroughly clean the device.
Treat all movable parts with an environmentally friendly oil.
Never use any grease!
Slide the protective cover on the cutting device.
Remove the spark plug connector.
Empty the fuel tank completely.
Dispose of remaining fuel in an environmentally compatible
manner.
Operate the engine until the carburettor is empty.
Attach the knives protection (F).
14. Disposal and recycling
The equipment is supplied in packaging to prevent it from be-
ing damaged in transit. The raw materials in this packaging
can be reused or recycled.
The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer or your
local council.
The packaging is wholly composed of
environmentally-friendly materials that can be
disposed of at a local recycling centre.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
15. Troubleshooting
Fault Possible cause Remedy
Hedge trimmer does not
work. • No fuel supply
• Fault in the fuel line
• Fuel filter clogged
• Spark plug defective
• Carburettor defective
• Internal fault
• Check the fuel quantity
• Check the fuel line for kinks or damages
• Clean/replace the fuel filter
• Replace the spark plug
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
Hedge trimmer cuts with
interruptions • Internal fault
• ON / OFF switch defective
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
Engine is running, cutting
device does not move • Cutting device blocked
• Internal fault
• Clutch defective
• Remove object
• Manufacturer or responsible customer service must
be called
• Manufacturer or responsible customer service must
be called
Cutting device gets hot • Missing lubrication => friction
• Cutting blades are blunt • Oil the cutting device
• Have the cutting device sharpened