Parkside PHS 600 B2, Translation Of The Original Instructions

Page: 10 / 36

GB
│
IE
│
NI
│
CY
│ 7 ■ PHS 600 B2
Symbols
Read these operating instructions
thoroughly before using the tool for
the first time, and retain them for fu-
ture reference .
WARNING! Special safety precau-
tions are required when working with
the electric hedge trimmer .
Read and observe all warnings .
Wear a hard hat!
Wear safety goggles!
Attention! Risk of injury from sharp
blades .
Protect the appliance from rain and
moisture!
Guaranteed sound power level of
the tool
Pull the plug out of the socket imme-
diately if the power cable is dam-
aged, tangled or cut .
Keep others away! Maintain a safe
distance!
Operation
NOTE
► Always remove the blade guard when
working with the hedge trimmer .
Switching on and off
ATTENTION!
► In the event of imminent danger or an emer-
gency switch off the motor immediately and
unplug the appliance .
WARNING!
► Never use the hedge trimmer while you are
tired, ill or under the influence of alcohol or
other drugs or medications .
NOTE
► Please note that legal restrictions in your
country may limit your use of the hedge trim-
mer .
► Inspect the hedge trimmer daily before every
use . Also check the hedge trimmer after
knocks and drops to rule out any significant
damage or defects .
► For the sake of your health, take regular
breaks while working . Physical fatigue in-
creases the risk of injury!
► Remove thicker branches with a branch cutter .
Switching on:
♦ Connect the power cable to an extension
cable .
♦ Form a loop at the end of the extension cable
and attach this to the strain relief .
♦ Press the safety lock-out and keep it pressed
and then press the On/Off switch .