GB
IE
26
er tool for your applica-
tion.
The correct power tool
will do the job better and safer
at the rate for which it was de-
signed.
b)
Do not use the power tool
if the switch does not turn
it on and off.
Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c)
Remove the plug from
the wall socket and/or
remove the rechargeable
battery before you change
the device’s settings,
change accessory parts or
put away the power tool.
Such preventive safety measures
reduce the risk of starting the
power tool accidentaIly.
d)
Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e)
Look after the power tool
and application tool care-
fully. Check for misalign-
ment or binding of moving
parts, breakage of parts
and any other condition
that may affect the power
tool’s operation. If dam-
aged, have the power tool
repaired before use.
Many
accidents are caused by poorly
maintained power tools.
f)
Keep cutting tools sharp
and clean.
Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
g)
Use the power tool, ac-
cessories and tool bits etc.
in accordance with these
instructions, taking into
account the working con-
ditions and the work to be
performed.
Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.
Slippery handles and grip sur-
faces do not permit safe opera-
tion and control over the power
tool in unexpected situations.
5) CAREFUL HANDLING AND
USE OF BATTERY DEVICES
a) Charge the batteries only
in chargers that are rec-
ommended by the manu-
facturer.
Risk of fire if a
charger that is suitable for a
specific type of battery is used
with other batteries.
b) In the power tools, use
only the batteries de-
signed for the purpose.
The
use of other batteries may result
in injuries and risk of fire.
c) Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts.
A
short circuit between the battery
contacts may cause burns or
fire.
Summary of Contents for PHKSA 12 B3
Page 124: ...124...
Page 133: ...20200728_rev02_ts 133...
