![background image](http://html.mh-extra.com/html/parkside/pgkga-40-li-b2/pgkga-40-li-b2_original-instructions-manual_758490072.webp)
72
IE
GB
Trouble Shooting
Problem
Possible cause
Troubleshooting
Device does not
start
Discharge the battery (
A
25)
Charge the battery (observe the se-
parate operating instructions for the
rechargeable battery and charger)
Battery (
A
25) not inserted
Insert the rechargeable battery (ob-
serve the separate operating instruc-
tions for the rechargeable battery
and charger)
On/off switch (
A
30) is bro-
ken
Repair by service centre
Defective motor
Device works with
interruptions
Internal loose contact
Repair by service centre
On/off switch (
A
30) is bro-
ken
Blades become
hot
Cutter bar (
A
11) has not-
ches
Check or replace the cutter bars
(11) (Service Centre)
Too much friction due to lack
of lubrication
Lubricate cutter bar (
A
11)
Saw is having
diffi culties running,
chain jumps off
Insuffi cient chain tension
Check chain tension
Chain gets hot,
smoke develops
while sawing, the
rail changes colour
Too little chain oil
Check oil level and top of chain oil
if necessary, check the oil automati-
on and clean the oil drainage duct
as needed, or arrange for repair by
customer service
Bad cutting output
Saw chain (
A
1)/cutter bar
(
A
11)/3-tooth blade (
A
12) dull
Sharpen or replace saw chain /
regrind or replace cutter bar / re-
place 3-tooth blade (service centre)
Insuffi cient chain tension
Check chain tension
Spool is empty
Replace the spool