![background image](http://html.mh-extra.com/html/parkside/pgkga-40-li-b2/pgkga-40-li-b2_original-instructions-manual_758490045.webp)
45
IE
GB
String length ................................. 5 m
Speed, spool n .................... 7000 rpm
Max. speed, spool n
max
........13300 rpm
Vibration on handgrip
(a
h
) ..............3.690 m/s
2
; K= 1.5 m/s
2
Vibration on round handle
(a
h
) ............. 4.320 m/s
2
; K= 1.5 m/s
2
Sound pressure level
(L
pA
) ...................82 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .. 93.6 dB(A), K
WA
= 2.24 dB
guaranteed ........................ 96 dB(A)
Brush cutter
Cutting diameter, 3-tooth blade 25.4 cm
Speed, blade n .................... 7300 rpm
Max. speed, blade n
max
...... 10000 rpm
Vibration on handgrip
(a
h
) ..............3.690 m/s
2
; K= 1,5 m/s
2
Vibration on round handle
(a
h
) ..............4.320 m/s
2
; K= 1,5 m/s
2
Sound pressure level
(L
pA
) ...................82 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .. 93.6 dB(A), K
WA
= 2.24 dB
guaranteed ........................ 96 dB(A)
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value
may differ during actual use of the power
tool from the stated value depending on the
manner in which the power tool is used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures to
reduce vibration exposure are the wearing
of gloves when using the tool and limiting
the working hours. For this purpose all
parts of the operating cycle have to be
considered (for example, times when the
electric tool is switched off and times when
it is switched on but running without any
load).
Attention! An up-to-date list of
battery compatibility can be
found at: www.lidl.de/akku
Notes on Safety
This section describes the basic
safety rules when working with the
device.
This device must not be used by
children. Children should be su-
pervised to ensure that they do not
play with the device. Cleaning and
maintenance must not be carried
out by children.
The device must not be used by
persons with impaired physical,
sensory or mental capabilities, or
anyone who does not have suf-
fi cient experience or knowledge.
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Instruction symbols with infor-
mation on preventing damage.
Wear cut-resistant gloves.
Help symbols with information
on improving tool handling.