Parkside PFDS 33 B2, Assembly, Operating And Safety Instructions

Page: 17 / 49

17 GB/IE/NI
Assembly
It is recommended that you always carry out
work with another person.
I
Push the flux-cored wire through the wire outlet
26
(see Fig. J).
J
26
Lead the wire along the feed roller
29
and
then push it into the cable assembly intake
31
(see Fig. K).
K
29 31
Pivot the pressing roller unit
28
in the direction
of the feed roller
29
(see Fig. L).
Mount the adjusting knob
27
(see Fig. L).
Adjust the counter-pressure using the adjusting
knob in such a way that the welding wire sits
tightly between the pressing roller and the feed
roller
29
in the upper duct without being
squashed (see Fig. L).
L
29 28 27
Switch the welding unit on using the main
switch
5
.
Press the burner button
12
.
Now the wire feeder system will push the weld-
ing wire through the cable assembly
13
and
the burner
11
.
As soon as the wire protrudes 1 – 2 cm from
the torch neck
32
you can release the burner
button
12
once more (see Fig. M).
Assembly