Parkside PFBS 160 B2, Instruction Manual, Page: 14 / 94

PFBS 160 B2 GB
│
CY
│
11 ■
Using the grip ring with LED light
♦ Hold down the spindle lock and screw the
tensioning nut anticlockwise off the thread.
♦ Release the spindle lock .
♦ Then screw the union nut anticlockwise off
the thread.
♦ Screw the grip ring with LED clockwise onto
the screw thread.
♦ Hold down the spindle lock and screw the
tensioning nut clockwise onto the thread.
♦ Release the spindle lock .
♦ Move the ON/OFF switch of the LED light
to the position "I" to switch it on (see fig. C).
♦ Move the ON/OFF switch of the LED light
to the position "O" to switch it off again.
♦ Proceed in reverse order to replace the union
nut .
Notes on working with materials/
tools/speed range
■ Use the milling bits for working on wood, plas-
tics and plasterboard at maximum speed.
■ Determine the rotational speed range for work-
ing on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces.
■ Use a low rotational speed for work on plastics
and materials with a low melting point.
■ Use a high rotational speed for working on
wood.
■ Carry out cleaning, polishing and buffing work
in the medium speed range.
NOTE
► The milling bit is not suitable for steel or
iron. Suitable products are available in stores.
The following are recommendations only and not
binding. When carrying out practical work, carry
out your own tests to see which tool and which set-
tings are ideal for the material you are working on.
Set a suitable rotational speed:
Number on the speed
control Material being
worked
1 Plastics and materials
with a low melting
point
2–3 Stone, ceramics
4 Soft wood, metal
5 Hardwood
Max.
Steel