Parkside PFBS 160 B2, Instruction Manual, Page: 13 / 94

PFBS 160 B2 ■ 10
│
GB
│
CY
Use
Changing/inserting the tool/collet
chuck
♦ Press the spindle lock and hold it down.
♦ Turn the tensioning nut until the lock clicks
into place.
♦ Undo the tensioning nut from the thread
using the combination spanner .
♦ Remove any tool which is inserted.
♦ First push the intended tool through the tension-
ing nut before inserting it into the appropri-
ate collet chuck for the tool shaft.
♦ Press the spindle lock and hold it down.
♦ Push the collet chuck into the thread insert
and screw the tensioning nut tight with the
combination spanner .
Using an accessory tool with a mandrel:
♦ Use the screwdriver side of the combination
spanner to undo and tighten the screw on
the mandrel.
♦ Insert the mandrel into the appliance as de-
scribed.
♦ Use the combination spanner to undo the
screw on the mandrel.
♦ Insert the desired accessory tool between the
two washers on the screw.
♦ Use the combination spanner to tighten the
screw on the mandrel.
Whet stone
♦ Do not manually grind any edges with the whet
stone .
Fitting abrasive belts
♦ Push the abrasive belt onto the abrasive belt
mandrel from above. Tighten the screw on
the abrasive belt mandrel in order to fix the
abrasive belt .
Fitting polishing attachments
♦ Screw the polishing attachment onto the tip
of the mandrel for polishing attachments .
Switching on and off/setting speed
range
CAUTION!
■ The rotation direction can be read off the
arrow engraved on the union nut (anti-
clockwise symbol).
Switching on/setting the speed range:
♦ Set the ON/OFF switch to the "I" position.
♦ Set the infinitely variable speed control to
a position between "1" and "MAX".
Switching off:
♦ Move the ON/OFF switch to the position
"O".