Parkside PEH 30 C3 Translation Of The Original Instructions Download Page 15

PEH 30 C3

GB

IE

NI

CY

 11 

parts which could be considered as consumable 
parts such as switches or parts made of glass .
The warranty does not apply if the product has 
been damaged, improperly used or improperly 
maintained . The directions in the operating instruc-
tions for the product regarding proper use of 
the product are to be strictly followed . Uses and 
actions that are discouraged in the operating 
instructions or which are warned against must be 
avoided .
This product is intended solely for private use and 
not for commercial purposes . The warranty shall 
be deemed void in cases of misuse or improper 
handling, use of force and modifications / repairs 
which have not been carried out by one of our 
authorised Service centres .

The warranty period does not apply to

■ 

Normal reduction of the battery capacity 
over time

■ 

Commercial use of the product

■ 

Damage to or alteration of the product by the 
customer

■ 

Non-compliance with safety and maintenance 
instructions, operating errors

■ 

Damage caused by natural hazards

Warranty claim procedure

To ensure quick processing of your case, please 
observe the following instructions:

■ 

Please have the till receipt and the item number 
(e .g . IAN 12345) available as proof of purchase .

■ 

You will find the item number on the type plate 
on the product, an engraving on the product, 
on the front page of the operating instructions 
(below left) or on the sticker on the rear or 
bottom of the product .

■ 

If functional or other defects occur, please 
contact the service department listed either by 

telephone

 or by 

e-mail

 .

■ 

You can return a defective product to us free 
of charge to the service address that will be 
provided to you . Ensure that you enclose the 
proof of purchase (till receipt) and information 
about what the defect is and when it occurred .

 You can download these instructions 
along with many other manuals, 
product videos and installation 
software at www .lidl-service .com .

 This QR code will take you directly to the Lidl 
service page (www .lidl-service .com) where you 
can open your operating instructions by entering 
the item number (IAN) 346205_2004 .

NOTE

► 

For Parkside and Florabest tools, please send 
us only the defective item without the acces-
sories (e .g . battery, storage case, assembly 
tools, etc .) .

Service

 Service Great Britain

 

Tel .: 0800 404 7657 
E-Mail: kompernass@lidl .co .uk

 Service Ireland

 

Tel .: 1890 930 034 
(0,08 EUR/Min ., (peak)) 
(0,06 EUR/Min ., (off peak)) 
E-Mail: kompernass@lidl .ie

CY

 Service Cyprus 

Tel .: 8009 4409 
E-Mail: kompernass@lidl .com .cy

IAN 346205_2004

Importer

Please note that the following address is not the 
service address . Please use the service address 
provided in the operating instructions .

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www .kompernass .com

Summary of Contents for PEH 30 C3












































Reviews: